Rotel Michi X3
Overview
The Michi X3 Integrated Amplifier delivers uncompromised audio performance conveniently packaged in an elegant industrial design. The X3 delivers 350 Watts of Class AB output power into 4 ohm loads maintaining musical accuracy with exceptional acoustic detail from the Analog, Digital, PC-USB, apt-X Bluetooth and Moving Magnet Phono Stage source inputs.
Product Description
The Michi X3 Integrated Amplifier delivers uncompromised audio performance with a full array of source inputs including Analog, Digital, PC-USB, XLR, apt-X Bluetooth and a Moving Magnet Phono Stage connection for classic vinyl lovers. The X3 is conveniently packaged in an elegant industrial design delivering 350 Watts of Class AB power into 4 ohm speakers while maintaining musical accuracy with exceptional acoustic detail.
Every aspect of the X3 has been custom engineered with all critical circuits and components hand selected through rigorous listening sessions and bench testing. Engineered with over 58 years of audio engineering experience the X3 is sure to bring countless hours of entertainment.
Specification
Maximum Power Output 350 watts/channel, 4Ω
Continuous Power Output 200 watts/channel, 8Ω
Total Harmonic Distortion < 0.008%
Intermodulation Distortion < 0.03%
(60 Hz : 7kHz, 4:1)
Frequency Response:
Phono Input 20 Hz - 20kHz, 0 ± 0.4 dB
Line Level Inputs 10 Hz - 100kHz, 0 ± 0.4 dB
Damping Factor (20 Hz - 20kHz, 8 ohms) 350
Input Sensitivity / Impedance
Phono Input (MM) 5.2 mV / 47k ohms
Line Level Inputs (RCA) 340 mV / 100k ohms
Line Level Inputs (XLR) 540 mV / 100k ohms
Input Overload
Phono Input (MM) 60 mV
Line Level Inputs (RCA) 3.5 V
Line Level Inputs (XLR) 5.5 V
Preamplifier Output Level / Impedance 1.9 V / 100 ohms
Tone Control
Bass ± 10 dB at 100Hz
Treble ± 10 dB at 10kHz
Signal to Noise Ratio (IHF A weighted)
Phono Input (MM) 80 dB
Line Level Inputs 102 dB
Channel Separation
Phono Input (MM) > 55 dB
Line Level Inputs > 55 dB
Digital Section
Frequency Response 20 Hz - 20k Hz (0 ± 0.4 dB)
Signal to Noise Ratio (IHF ”A” weighted) 102 dB
Input Sensitivity/Impedance 0 dBfs / 75 ohms
Preamplifier Output Level 1.3 V (at -20 dB Volume Position)
Coaxial/Optical Digital Signals SPDIF LPCM
(up to 192k Hz 24 bit)
PC-USB USB Audio Class 1.0
(up to 96kHz 24bit)
USB Audio Class 2.0
(up to 384kHz 24bit)*
*Driver installation required
DSD and DoP support.
Power Requirements:
USA: 120 volts, 60 Hz
EC: 230 volts, 50 Hz
Power Consumption 500 watts
Standby Power Consumption
Nornal < 0.5 watts
Network wakeup < 2 watts
BTU (4 ohms, 1/8th power) 1303 BTU/h
Dimensions (W x H x D) 485 x 150 x 452 mm
( 19 x 6 x 17 3/4 ins.)
Front Panel Height 132 mm, 5 1/4 ins
Weight (net) 28.9 kg, 63.7 lbs.
